Enjoy FREE SHIPPING on every order, fully insured for your peace of mind.
Description
1. Suitable for pipe diameter: 22mm
2. Input voltage: DC12V
3. Product power: 35W red, 25W blue, 17W green
4. How to use the switch: press and hold for 3 seconds to turn on, the red breathing light will turn on, and it will automatically turn blue when a certain temperature is reached. Press once to change the temperature of the blue light to medium temperature. Lowest, press three times for the red third gear high temperature, press and hold for 3 seconds to turn off, and automatically turn off after 2 hours of standby.
5. Accessories: 3M plastic x1, rearview mirror fixing bracket x1
6. Built-in intelligent temperature control chip, three-stage temperature adjustment, intelligent temperature control is more secure
7. Double throttle line buckle, wider installation range
8. Can be sealed and vented design, does not affect the handlebar outside the handlebar, only the decorative accessories such as lights, more beautiful and convenient
9. The product has added a standby mode. After switching to standby mode, the electric heating handle will automatically be thermostated to about 50 degrees, and it will automatically shut down after two hours. You no longer have to worry about exhausting the motorcycle battery because you forget to turn off the switch.
Instructions:
1. Power on: the red light, blue light, and green light each flash once and then go out.
2. Standby: the red light flashes in the state of breathing, the temperature reaches the apex and it will automatically turn to the blue light in mid-range, and it will automatically shut down after 2 hours.
3. Working status: indicator light is always on (large gear: red light is always on, middle gear: blue light is always on, low gear, green light is always on)
4. Press and hold the key for 3 seconds: enter standby mode or shut down
5. Click on the key: switch gear
Installation notes:
1. Remove the original handlebar
2. Wet the inner hole of the left hand with soapy water, and the twisting amplitude should not be too large during installation.
3. When installing the balance iron on the left handle, adjust the position of the balance iron to be slightly separated from the handle. Do not squeeze the handle when tightening the screws.
4. Power line, red line is connected to positive pole, black line is connected to negative pole, please confirm before connecting, do not connect reverse
5. When the left handle is installed, leave enough power for the power cord.
6. Put the switch L-shaped bracket on the rear-view mirror, fix it to the base of the rear-view mirror, and tighten it.
2. Input voltage: DC12V
3. Product power: 35W red, 25W blue, 17W green
4. How to use the switch: press and hold for 3 seconds to turn on, the red breathing light will turn on, and it will automatically turn blue when a certain temperature is reached. Press once to change the temperature of the blue light to medium temperature. Lowest, press three times for the red third gear high temperature, press and hold for 3 seconds to turn off, and automatically turn off after 2 hours of standby.
5. Accessories: 3M plastic x1, rearview mirror fixing bracket x1
6. Built-in intelligent temperature control chip, three-stage temperature adjustment, intelligent temperature control is more secure
7. Double throttle line buckle, wider installation range
8. Can be sealed and vented design, does not affect the handlebar outside the handlebar, only the decorative accessories such as lights, more beautiful and convenient
9. The product has added a standby mode. After switching to standby mode, the electric heating handle will automatically be thermostated to about 50 degrees, and it will automatically shut down after two hours. You no longer have to worry about exhausting the motorcycle battery because you forget to turn off the switch.
Instructions:
1. Power on: the red light, blue light, and green light each flash once and then go out.
2. Standby: the red light flashes in the state of breathing, the temperature reaches the apex and it will automatically turn to the blue light in mid-range, and it will automatically shut down after 2 hours.
3. Working status: indicator light is always on (large gear: red light is always on, middle gear: blue light is always on, low gear, green light is always on)
4. Press and hold the key for 3 seconds: enter standby mode or shut down
5. Click on the key: switch gear
Installation notes:
1. Remove the original handlebar
2. Wet the inner hole of the left hand with soapy water, and the twisting amplitude should not be too large during installation.
3. When installing the balance iron on the left handle, adjust the position of the balance iron to be slightly separated from the handle. Do not squeeze the handle when tightening the screws.
4. Power line, red line is connected to positive pole, black line is connected to negative pole, please confirm before connecting, do not connect reverse
5. When the left handle is installed, leave enough power for the power cord.
6. Put the switch L-shaped bracket on the rear-view mirror, fix it to the base of the rear-view mirror, and tighten it.
Cancellation Policy:
We at Order2india strive to provide you with the best possible experience while you shop with us online. Since our orders are shipped from overseas , we try to reduce the handling time as much as possible by quickly processing the orders , Hence any cancellation request , has to be placed within 24 hours of placing the order. The refund amount will be credited back on your original mode of Payment. .
Warranty:
All our products comes with a default 90 days seller replacement warranty against manufacturer defect as a service and reassurance to our customers. Order2india will take care of all logistics to and from the manufacturer/supplier for replacement . If within 90 days of delivery ,any problem is found with our product , please contact our customer support and we would replace it for you absolutely free.
Return Policy
Our return policy is outlined below. The policy reflects the reality that our products are sourced from suppliers located outside India and is formulated keeping in mind the costs and time involved in the logistics, both in the forward direction (i.e. shipping products to India from the suppliers) and reverse direction (i.e. shipping returned products back to the suppliers).Certain products are not eligible for return or refund as below
Return Process & Timeline
For eligible products, the policy is summarized below. Please note that Returns that do not meet the Return Process and Timeline below will not be eligible for a refund.
|
|
Allowed Time Line |
Return Process |
|
Due to Damage in transit |
Within 24 hours of Delivery |
Inspect package before taking Delivery and if damaged REJECT package and DO NOT take delivery from the courier and Send email to support@order2india.com within 24 hours of rejecting the delivery so we can process your refund. |
|
Dead on Arrival or mal-functioning product |
Within 15 days of Delivery |
Contact us or email us at support@order2india.com within 15 days of delivery with details of the problem. |
|
Incorrect Order (e.g. model, brand, color or size different from what was ordered) |
Within 15 days of Delivery |
Contact us or email us at support@order2india.com within 7 days of delivery with details of the problem. |
We process your payment information securely. We do not store credit card details nor do we have access to your credit card information.
If you receive a parcel with missing, incorrect, or secondary packing items, please contact us within 7 days of delivery with relevant proof. Order2india will assess the situation and provide resolution based on the extent of the damage.
You may also like
Recently viewed
