Enjoy FREE SHIPPING on every order, fully insured for your peace of mind.
ITEM NAME:V3 Engraving Machine Expansion Board + Drv8825 Driver with Heat Sink for ArdW4Z5 V3 Engraving Machine Expansion Board + Drv8825 Driver with Heat Sink for ArdW4Z5 Simple step and direction control interface; The interface can connect directly with 3.3V and 5V systems; Support over-temperature thermal shutdown, over-current shutdown and under-voltage lockout; Support short-to-ground and shorted-load protection; Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step; 4-layer, 2 oz copper PCB for improved heat dissipation. Adjustable current control support you to set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage to achieve higher step rates; Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay). Uses removable A4988 or DRV8825 compatible stepper drivers. The extension board can be used for carving machine, 3 d printer driver expansion board GRBL 0.8 compatible. (Open source firmware that runs on an for Arduino UNO that turns G-code commands into stepper signals) PWM Spindle and direction pins,4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place. Please e that this is an unassembled kit and Basic solde skills are needed. DRV8825 Stepper Motor Driver The module has an interface pinout is almost the same with A4988 stepper motor drive cer, so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step). It uses 8.2 - 45V, can provide up to about 1.5 per phase no heat sink or forced air flow (rated up to 2.2 per volume sufficient additional cooling). 45V maxim.Uses removable A4988 or DRV8825 compatible stepper drivers. DRV8825 Stepper Motor Driver. DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step).
Enjoy FREE SHIPPING on every order, fully insured for your peace of mind.
Cancellation Policy:
We at Order2india strive to provide you with the best possible experience while you shop with us online. Since our orders are shipped from overseas , we try to reduce the handling time as much as possible by quickly processing the orders , Hence any cancellation request , has to be placed within 24 hours of placing the order. The refund amount will be credited back on your original mode of Payment. .
Warranty:
All our products comes with a default 90 days seller replacement warranty against manufacturer defect as a service and reassurance to our customers. Order2india will take care of all logistics to and from the manufacturer/supplier for replacement . If within 90 days of delivery ,any problem is found with our product , please contact our customer support and we would replace it for you absolutely free.
Return Policy
Our return policy is outlined below. The policy reflects the reality that our products are sourced from suppliers located outside India and is formulated keeping in mind the costs and time involved in the logistics, both in the forward direction (i.e. shipping products to India from the suppliers) and reverse direction (i.e. shipping returned products back to the suppliers).Certain products are not eligible for return or refund as below
Return Process & Timeline
For eligible products, the policy is summarized below. Please note that Returns that do not meet the Return Process and Timeline below will not be eligible for a refund.
|
|
Allowed Time Line |
Return Process |
|
Due to Damage in transit |
Within 24 hours of Delivery |
Inspect package before taking Delivery and if damaged REJECT package and DO NOT take delivery from the courier and Send email to support@order2india.com within 24 hours of rejecting the delivery so we can process your refund. |
|
Dead on Arrival or mal-functioning product |
Within 15 days of Delivery |
Contact us or email us at support@order2india.com within 15 days of delivery with details of the problem. |
|
Incorrect Order (e.g. model, brand, color or size different from what was ordered) |
Within 15 days of Delivery |
Contact us or email us at support@order2india.com within 7 days of delivery with details of the problem. |
We process your payment information securely. We do not store credit card details nor do we have access to your credit card information.
If you receive a parcel with missing, incorrect, or secondary packing items, please contact us within 7 days of delivery with relevant proof. Order2india will assess the situation and provide resolution based on the extent of the damage.
