Enjoy FREE SHIPPING on every order, fully insured for your peace of mind.
Description
1. 12V Voltage, 22MM handlebars internal diameter, suitable for most motorcycles
2. The product sets up high and low-grade switches, which can adjust the temperature of the handlebars at will (50-70 Celsius degree adjustable).
3. Double throttle line buckle, wider installation range
4. Open/sealing two-in-one design, more powerful, able to meet the needs of more people
5. Input voltage: 12V
6. Product power: 12W-24W adjustable
7. Handle temperature: 50-70 Celsius degree adjustable
8. Handlebar type: open/seal two-in-One electric heating handle
9. Switch type: Multi-Stage adjustable switch
10. Handlebar length: left handlebar: 122 mm; right handlebar: 136 mm
11. Handlebar diameter: 22mm
12. Net weight: 242g
Installation instructions:
1. Remove the original driver handlebars
2. Moisten the inner hole with soapy water with left hand, and the torsion range should not be too large during installation.
3. When installing the balance iron with the left hand, the position of the balance iron is adjusted to be slightly separated from the handle, and the handle cannot be squeezed when tightening the screw.
4. Use the middle left hand handle to slide on the steel pipe, remove the balance iron, and fix the tail with a few drops of 502 glue from the hand.
5. Power cord, red wire connected with positive, black wire connected with negative, reverse temperature can not be adjusted.
6. When installing the left handgrip, the power cord should leave enough rotating remainder.
Matters needing attention:
1. When the left hand handle is installed, do not twist the handle too much. Excessive twisting will cause the electric heating wire to shift.
2. For the car with balancing iron, please adjust the installation position of balancing iron. Do not squeeze the handle when tightening the screw. The balancing iron is slightly separated from the handle. If the installation position of the balance iron can not be adjusted, please separate the balance iron from the handlebars by adding gaskets. Excessive extrusion of the handlebars will cause difficulty in switching the handlebars and abnormal damage to the surface of the handlebars extruded by the electric heating wire.
2. The product sets up high and low-grade switches, which can adjust the temperature of the handlebars at will (50-70 Celsius degree adjustable).
3. Double throttle line buckle, wider installation range
4. Open/sealing two-in-one design, more powerful, able to meet the needs of more people
5. Input voltage: 12V
6. Product power: 12W-24W adjustable
7. Handle temperature: 50-70 Celsius degree adjustable
8. Handlebar type: open/seal two-in-One electric heating handle
9. Switch type: Multi-Stage adjustable switch
10. Handlebar length: left handlebar: 122 mm; right handlebar: 136 mm
11. Handlebar diameter: 22mm
12. Net weight: 242g
Installation instructions:
1. Remove the original driver handlebars
2. Moisten the inner hole with soapy water with left hand, and the torsion range should not be too large during installation.
3. When installing the balance iron with the left hand, the position of the balance iron is adjusted to be slightly separated from the handle, and the handle cannot be squeezed when tightening the screw.
4. Use the middle left hand handle to slide on the steel pipe, remove the balance iron, and fix the tail with a few drops of 502 glue from the hand.
5. Power cord, red wire connected with positive, black wire connected with negative, reverse temperature can not be adjusted.
6. When installing the left handgrip, the power cord should leave enough rotating remainder.
Matters needing attention:
1. When the left hand handle is installed, do not twist the handle too much. Excessive twisting will cause the electric heating wire to shift.
2. For the car with balancing iron, please adjust the installation position of balancing iron. Do not squeeze the handle when tightening the screw. The balancing iron is slightly separated from the handle. If the installation position of the balance iron can not be adjusted, please separate the balance iron from the handlebars by adding gaskets. Excessive extrusion of the handlebars will cause difficulty in switching the handlebars and abnormal damage to the surface of the handlebars extruded by the electric heating wire.
Cancellation Policy:
We at Order2india strive to provide you with the best possible experience while you shop with us online. Since our orders are shipped from overseas , we try to reduce the handling time as much as possible by quickly processing the orders , Hence any cancellation request , has to be placed within 24 hours of placing the order. The refund amount will be credited back on your original mode of Payment. .
Warranty:
All our products comes with a default 90 days seller replacement warranty against manufacturer defect as a service and reassurance to our customers. Order2india will take care of all logistics to and from the manufacturer/supplier for replacement . If within 90 days of delivery ,any problem is found with our product , please contact our customer support and we would replace it for you absolutely free.
Return Policy
Our return policy is outlined below. The policy reflects the reality that our products are sourced from suppliers located outside India and is formulated keeping in mind the costs and time involved in the logistics, both in the forward direction (i.e. shipping products to India from the suppliers) and reverse direction (i.e. shipping returned products back to the suppliers).Certain products are not eligible for return or refund as below
Return Process & Timeline
For eligible products, the policy is summarized below. Please note that Returns that do not meet the Return Process and Timeline below will not be eligible for a refund.
|
|
Allowed Time Line |
Return Process |
|
Due to Damage in transit |
Within 24 hours of Delivery |
Inspect package before taking Delivery and if damaged REJECT package and DO NOT take delivery from the courier and Send email to support@order2india.com within 24 hours of rejecting the delivery so we can process your refund. |
|
Dead on Arrival or mal-functioning product |
Within 15 days of Delivery |
Contact us or email us at support@order2india.com within 15 days of delivery with details of the problem. |
|
Incorrect Order (e.g. model, brand, color or size different from what was ordered) |
Within 15 days of Delivery |
Contact us or email us at support@order2india.com within 7 days of delivery with details of the problem. |
We process your payment information securely. We do not store credit card details nor do we have access to your credit card information.
If you receive a parcel with missing, incorrect, or secondary packing items, please contact us within 7 days of delivery with relevant proof. Order2india will assess the situation and provide resolution based on the extent of the damage.
You may also like
Recently viewed
