Enjoy FREE SHIPPING on every order, fully insured for your peace of mind.
Description
Feature
1. Newest technology single base plate two-sided SMD patch technology,mature stable thermoelectric separation technology,can make the luminous position between the two LED Chips closer to the center,to achieve the best focusing effect;
2. The thickness of the copper plate is the same as that of the halogen lamp 0.8mm;
3. The focal length of the copper plate is the same as that of the halogen lamp 6mm;
4. Planar luminescence LED Chip lumen output is much higher than the industry level;
5. Aviation aluminum alloy shell,good heat transfer effect,cooling fast and continuous;
6. Japan technical double ball high speed turbo fan 10,000rpm / 50,000hrs lifespan;
7. Mini driver can also be installed in a small space;
8. Wire using flame retardant materials resistant to high temperature;
9. Hi/Lo beam bulb have auto switch function,negative control models can also be used,non-polar install;
10. Implanted interference free circuit,reduce electromagnetic radiation,keep radio function in normal use;
.No line change,Not modified,No damage to any component,Plug and play,Circuit anti reverse function,0.001 second boot.
Installation instruction
1.Led headlight kit installations start with preparation.You have to make sure the vehicle is off the battery is disconnected,and the engine is cooled down.This is will ensure your safety.
2.Now we can move to the actual installation.If you have a single low beam kit,locate your low beam dust cover on the back of your headlight assembly.Remove the cover by twisting it counter clock wise.This should unscrew the dust cover giving you access to the bulb.Make sure you unplug the bulb from the wiring harness before you attempt to remove it.Now you can continue to place the LED bulb in place of the halogen bulb you just removed,just make sure you don't touch the glass part of the bulb.Customers can contact with us for installation detail for any bulbs size like 9007/9004 80W installation with more complicated steps.
3.Installing the ballast/driver.First thing is to find a good location to place the ballast,somewhere close enough to able to reach the bulb with the wiring plugs.Once you have the ballast secured then you can proceed to plug the wiring to the bulb,and plug the old harness to the ballast.
4.In Led headlight kit installation is to double check all the wiring plugs to make sure everything snapped into place correctly.Also double check to make sure that the ballast/driver is securely attached to the vehicle.Now you can reconnect your battery and test out your new LED upgrade.
Note
These bulbs are CanBUS-Ready and will work with most vehicle's computer system without error.If you are not sure whether the right,please contact us before purchase.
1. Newest technology single base plate two-sided SMD patch technology,mature stable thermoelectric separation technology,can make the luminous position between the two LED Chips closer to the center,to achieve the best focusing effect;
2. The thickness of the copper plate is the same as that of the halogen lamp 0.8mm;
3. The focal length of the copper plate is the same as that of the halogen lamp 6mm;
4. Planar luminescence LED Chip lumen output is much higher than the industry level;
5. Aviation aluminum alloy shell,good heat transfer effect,cooling fast and continuous;
6. Japan technical double ball high speed turbo fan 10,000rpm / 50,000hrs lifespan;
7. Mini driver can also be installed in a small space;
8. Wire using flame retardant materials resistant to high temperature;
9. Hi/Lo beam bulb have auto switch function,negative control models can also be used,non-polar install;
10. Implanted interference free circuit,reduce electromagnetic radiation,keep radio function in normal use;
.No line change,Not modified,No damage to any component,Plug and play,Circuit anti reverse function,0.001 second boot.
Installation instruction
1.Led headlight kit installations start with preparation.You have to make sure the vehicle is off the battery is disconnected,and the engine is cooled down.This is will ensure your safety.
2.Now we can move to the actual installation.If you have a single low beam kit,locate your low beam dust cover on the back of your headlight assembly.Remove the cover by twisting it counter clock wise.This should unscrew the dust cover giving you access to the bulb.Make sure you unplug the bulb from the wiring harness before you attempt to remove it.Now you can continue to place the LED bulb in place of the halogen bulb you just removed,just make sure you don't touch the glass part of the bulb.Customers can contact with us for installation detail for any bulbs size like 9007/9004 80W installation with more complicated steps.
3.Installing the ballast/driver.First thing is to find a good location to place the ballast,somewhere close enough to able to reach the bulb with the wiring plugs.Once you have the ballast secured then you can proceed to plug the wiring to the bulb,and plug the old harness to the ballast.
4.In Led headlight kit installation is to double check all the wiring plugs to make sure everything snapped into place correctly.Also double check to make sure that the ballast/driver is securely attached to the vehicle.Now you can reconnect your battery and test out your new LED upgrade.
Note
These bulbs are CanBUS-Ready and will work with most vehicle's computer system without error.If you are not sure whether the right,please contact us before purchase.
Cancellation Policy:
We at Order2india strive to provide you with the best possible experience while you shop with us online. Since our orders are shipped from overseas , we try to reduce the handling time as much as possible by quickly processing the orders , Hence any cancellation request , has to be placed within 24 hours of placing the order. The refund amount will be credited back on your original mode of Payment. .
Warranty:
All our products comes with a default 90 days seller replacement warranty against manufacturer defect as a service and reassurance to our customers. Order2india will take care of all logistics to and from the manufacturer/supplier for replacement . If within 90 days of delivery ,any problem is found with our product , please contact our customer support and we would replace it for you absolutely free.
Return Policy
Our return policy is outlined below. The policy reflects the reality that our products are sourced from suppliers located outside India and is formulated keeping in mind the costs and time involved in the logistics, both in the forward direction (i.e. shipping products to India from the suppliers) and reverse direction (i.e. shipping returned products back to the suppliers).Certain products are not eligible for return or refund as below
Return Process & Timeline
For eligible products, the policy is summarized below. Please note that Returns that do not meet the Return Process and Timeline below will not be eligible for a refund.
|
|
Allowed Time Line |
Return Process |
|
Due to Damage in transit |
Within 24 hours of Delivery |
Inspect package before taking Delivery and if damaged REJECT package and DO NOT take delivery from the courier and Send email to support@order2india.com within 24 hours of rejecting the delivery so we can process your refund. |
|
Dead on Arrival or mal-functioning product |
Within 15 days of Delivery |
Contact us or email us at support@order2india.com within 15 days of delivery with details of the problem. |
|
Incorrect Order (e.g. model, brand, color or size different from what was ordered) |
Within 15 days of Delivery |
Contact us or email us at support@order2india.com within 7 days of delivery with details of the problem. |
We process your payment information securely. We do not store credit card details nor do we have access to your credit card information.
If you receive a parcel with missing, incorrect, or secondary packing items, please contact us within 7 days of delivery with relevant proof. Order2india will assess the situation and provide resolution based on the extent of the damage.
You may also like
Recently viewed
