0%-100% to 0-10V PWM to Voltage Converter Module for PLC MCU Digital to Analog

Roll over image to zoom in Click on image to zoom

0%-100% to 0-10V PWM to Voltage Converter Module for PLC MCU Digital to Analog

Name: 0%-100% to 0-10V PWM to Voltage Converter Module for PLC MCU Digital to Analog
Brand: O2INEW
SKU: O2I-0-144115207887
Price: 1379.0 INR
Availability: OutOfStock

O2INEW

Price:

Rs. 1,379.00

Quantity:

Share this product

ITEM NAME:0%-100% to 0-10V PWM to Voltage Converter Module for PLC MCU Digital to Analog Product Description Description: The PWM transfer voltage module LC-LM358-PWM2V converts the PWM digital signals into 0 to 10V analog signals. It can be used as signal interface switching for PLC or other industrial control boards. The output voltage is regulated by adjusting the duty ratio of the PWM. The modules are small in size and easy to use in different places. Features: 1>. MCU embedded technology 2>. Easy to operate, fine tuned by potentiometer 3>. Select the PWM signal input level range through short-circuit 4>. The module is smaller, easy to carry and use Parameter: Work Voltage:DC 12V-30V; (> 100MA) PWM Receiver Frequency:1KHZ-3KHZ PWM signal input level range: The peak of 4.5V to 10V level. The short cap install in â€˜5V'. This level is used for normal controller or 5V MCU The peak of 12V to 24V level, so inserted in 24V. The short cap install in â€˜24V'. This level is used for normal PLC controller Conversion range:0%-100% PWM to 0-10V Allowable error:5% Hardware Interface: VCC DC 12V-30V GND Ground PWM Positive of PWM input signal GND Negative of input signal VOUT Output Voltage 0-10V GND Output Voltage Ground Operation instructions: After power on, without input signal, the output is 0V, so only input can output. The first time when the power is on, it is best to do a calibration debugging:Input a 50% duty ratio signal to PWM/GND and adjust the relative amplitude short cap. The frequency is 1KHZ-3KHZ, Measured VOUT and GND with a multimeter and it will display 5V. Adjust potentiometer to make sure display 5V on multimeter. This will calibrate your pulse signal to this module. When the frequency changes, the correspondences may be offset and need to be re calibrated. The output voltage can be adjusted by adjusting the duty ratio. The accuracy can be controlled by adjusting the potentiometer.Find many great new & used options and get the best deals for 0%-100% to 0-10V PWM to Voltage Converter Module for PLC MCU Digital to Analog at the best online prices at Order2india Shopping! Free shipping for many products!

Enjoy FREE SHIPPING on every order, fully insured for your peace of mind.

Cancellation Policy:

We at Order2india strive to provide you with the best possible experience while you shop with us online. Since our orders are shipped from overseas , we try to reduce the handling time as much as possible by quickly processing the orders , Hence any cancellation request , has to be placed within 24 hours of placing the order. The refund amount will be credited back on your original mode of Payment. .

Warranty:

All our products comes with a default 90 days seller replacement warranty against manufacturer defect as a service and reassurance to our customers. Order2india will take care of all logistics to and from the manufacturer/supplier for replacement . If within 90 days of delivery ,any problem is found with our product , please contact our customer support and we would replace it for you absolutely free.

Return Policy

Our return policy is outlined below. The policy reflects the reality that our products are sourced from suppliers located outside India and is formulated keeping in mind the costs and time involved in the logistics, both in the forward direction (i.e. shipping products to India from the suppliers) and reverse direction (i.e. shipping returned products back to the suppliers).Certain products are not eligible for return or refund as below

Return Process & Timeline

For eligible products, the policy is summarized below. Please note that Returns that do not meet the Return Process and Timeline below will not be eligible for a refund.

Reason	Allowed Time Line	Return Process
Due to Damage in transit	Within 24 hours of Delivery	Inspect package before taking Delivery and if damaged REJECT package and DO NOT take delivery from the courier and Send email to support@order2india.com within 24 hours of rejecting the delivery so we can process your refund.
Dead on Arrival or mal-functioning product	Within 15 days of Delivery	Contact us or email us at support@order2india.com within 15 days of delivery with details of the problem. Product(s) must be re-packed in original packing along with all the material, manual that came alone with the order).
Incorrect Order (e.g. model, brand, color or size different from what was ordered)	Within 15 days of Delivery	Contact us or email us at support@order2india.com within 7 days of delivery with details of the problem. Product(s) must be re-packed in original packing along with all the material, manual that came alone with the order).

We process your payment information securely. We do not store credit card details nor do we have access to your credit card information.

If you receive a parcel with missing, incorrect, or secondary packing items, please contact us within 7 days of delivery with relevant proof. Order2india will assess the situation and provide resolution based on the extent of the damage.